Alarm Input Armed / IO Linkage on Alarm

From X10Wiki
Jump to navigation Jump to search

Question

How do I setup my Airsight Cameras to use Alarm Input Armed / IO Linkage on Alarm?


Answer

Alarm Settings for Internet Explorer

If you want to connect external alarm devices:

  • If it’s an alarm INPUT device, choose Alarm Input Armed to enable it
  • If it’s an alarm OUTPUT device, choose IO Linkage on Alarm to enable it.


IOLINKAGEfirst.png

External Alarm: Set external alarm function ON/OFF.


IOLINKAGE2.png

Alarm Duration: Set external alarm output duration (Relay close time), can be Forever, 5s, 10s, 15s, 30s, 60s.

IOLINKAGE3.png

Lose SD-Card Alarm: Set alarm triggered ON/OFF if the SD-Card is lost.

IOLINKAGE4.png


Alarm Input: Set alarm input ON/OFF, it supports NO/NC external alarm device, choose the correct mode to make sure it works well, it refers to the I/O pin6 (Input2) and pin7 (Input1).

IOLINKAGE5.png

Action with Alarm: These are actions optional for external alarm triggered.

IOLINKAGE6.png

Alarm Settings for Safari, Chrome, Firefox

Click Alarm to enter the interface:

IOLINKAGE7.png

External Alarm: Set external alarm function ON/OFF.

IOLINKAGE8.png

Alarm Duration: Set external alarm output duration (Relay close time), can be Forever, 5s, 10s, 15s, 30s, 60s.

IOLINKAGE9.png

Lose SD-Card Alarm: Set alarm triggered ON/OFF if the SD-Card is lost.

IOLINKAGE10.png

Alarm Input: Set alarm input ON/OFF, it supports NO/NC external alarm device, choose the correct mode to make sure it works well, it refers to the I/O pin6 (Input2) and pin7 (Input1).

IOLINKAGE11.png

Action with Alarm: These are actions optional for external alarm triggered.

IOLINKAGE12.png

Retrieved from "https://kbase.x10.com/index.php?title=Alarm_Input_Armed_/_IO_Linkage_on_Alarm&oldid=12633"