MyHouse Online Port and Protocol Information
Questions
What ports and protocols does MyHouse Online use?
What ports do I need to allow traffic on in my firewall or Internet security software?
Answer
The MyHouse Online Service will work for almost all Internet connection configurations, including most firewalls and with Network Address Translation (NAT). If you have extra security on the computer where you are using MyHouse Online, you may need to make some changes to the software to allow your MyHouse connection to work. Before you do, be sure you are logged in as a Power User or Administrator and can affect these changes.
Make sure the computer is able to accept incoming and outgoing TCP connections to myhouse.x10.com on port 80. Blocked or rerouted ports are behind about ninety-five percent of registration and connection problems. To verify this, run the Internet Connection Test at the following location:
http://www.x10.com/support/netinfo/netinfoadvance.htm
Type in 80 at the bottom where it says "listening port" and click on "Run Test Again." If it won't let you click on it, you will have to wait for the current test to finish - this could take up to 5 minutes.
Since each security program and firewall is different, you will need to consult your manual or the provided technical support for information on how to make the necessary changes.
Related Articles
Setting Up Remote Users in MyHouse Online
- Key Topics: user,remote,add,create,configure,password,access
- Relates to: CM15A, SW31A, SW32A, SW33A, SW34A
Troubleshooting Remote Connections in MyHouse Online
- Key Topics: myhouse,online,problem,trouble,troubleshoot,remote,access,user,client,service,port,firewall
- Relates to: SW34A
Sending E-mail with MyHouse Online
- Key Topics: myhouse,email,e-mail,macro,send,address
- Relates to: SW34A
- Key Topics: e-mail,configuration,setup
- Relates to: SW34A
- Key Topics: sw34a, remote, connection, myhouse
- Relates to: SW34A
- Key Topics: myhouse, setup, user, configuration, sw34a
- Relates to: SW34A