Mini Timer Troubleshooting

If you have problems answering these questions, please refer to MiniTimer Setup.

1) Is it flashing 18:88?

• YES = 18:88 Error

• NO = Go to Step 2

2) Does it light up when you plug it in? Does a red light come on when you press a On/Off button? Does the clock keep accurate time?

• YES = Go to Step 3

• N0 = If the MiniTimer does not light up at all then it may have an issue.

3) Can you control all your modules by pushing the buttons on the MiniTimer?

• YES = Go to Step 4

• NO = MiniTimer Module Control

4) When you set a timer, does it run if you make sure the 1-4/5-8 switch is in the correct position and you make sure you have AM/PM correct?

• YES = Go to Step 5

• NO = Double-check that your answer to 3 is Yes; if so, your MiniTimer may have an issue.

5) Are you having difficulties deleting an existing timer?

• YES = Deleting Stored MiniTimer Events

• NO = Please email support@x10.com with a detailed description of the problem you are experiencing.

If you have problems answering these questions, please refer to MiniTimer Setup.