Smart Power Line Command (PLC) Repeater Operating Instructions

From X10Wiki
Revision as of 01:35, 9 December 2015 by X10douglas (talk | contribs) (Created page with "'''Installation:''' 1. Find a suitable location, preferably centrally located between the transmitting and receiving units. 2. Plug the PLC Repeater into an AC outlet. '''Te...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Installation: 1. Find a suitable location, preferably centrally located between the transmitting and receiving units. 2. Plug the PLC Repeater into an AC outlet.


Testing The Repeater: 1. Send an X10 ON/OFF command from the transmitting unit. The LED on the PLC01 will blink twice for each command sent, indicating it has received and re-transmitted the command. 2. Plug the PLC Repeater into an AC outlet

Retrieved from "https://kbase.x10.com/index.php?title=Smart_Power_Line_Command_(PLC)_Repeater_Operating_Instructions&oldid=13511"