Using The SoundPower Remote

From X10Wiki
Revision as of 02:06, 25 January 2007 by Ericb (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Question

How do I adjust the volume?

Answer

Press and release the AUDIO button. The LED blinks once. Then press and release button 4 (AMP). This puts the remote into the mode to control the VR32A Wireless Amplifier/Speaker Driver.

Press VOL+ to increase volume on both channels or VOL- to decrease volume on both channels. Press CH+ to adjust balance to right channel, reducing left channel volume; CH- will adjust balance to left channel and reduce the right channel volume.

Press MUTE to toggle the audio output ON and OFF.

Retrieved from "https://kbase.x10.com/index.php?title=Using_The_SoundPower_Remote&oldid=4337"