Difference between revisions of "18:88 Error"

From X10Wiki
Jump to navigation Jump to search
Line 18: Line 18:
 
[[category: Hardware]]
 
[[category: Hardware]]
 
[[category: Troubleshooting]]
 
[[category: Troubleshooting]]
[[category: Configuration]]
 
 
[[category: Frequently asked questions]]
 
[[category: Frequently asked questions]]

Revision as of 01:26, 9 April 2014

Question

Why does my Mini Timer flash "18:88"?

Answer

The MT10A Mini Timer can manually control 8 modules and can be programmed to automatically control 4 modules. You can set 2 ON times and 2 OFF times for each of these 4 modules.


If you try to program more than 2 on or off times for a module, the display will flash "18:88" to let you know you exceeded the limit.


To clear this, set the slide switch to REVIEW, press the number button that you pressed when the display changed to 18:88, and then press CLEAR. Or, simply unplug the Mini Timer and take the battery out; then plug it back in and reset the time and your programmed events.


Note: You can only program times for units 1-4 or 5-8 (not both). If you set times for units 1-4 and then move the slide switch to position 5-8, the times you set for units 1-4 will affect modules set to 5-8 instead. If you try to program more times for units 5-8, the display will show 18:88 as described above, indicating that you have exceeded the 2 on/off times allowed per unit.