AirSight App Features

From X10Wiki
Jump to navigation Jump to search

Here is a simple guide that will walk you through the features available in the AirSight App


Getting to know the AirSight app

Upon running the app for the first time you will be presented with a blank CAMERA LIST


Use the icons along the bottom of the screen to navigate between the different tabs


After you've added your cameras to the app - you will return to the ADD CAMERA tab to see your list of cameras as well as their status


Use the EDIT button to delete cameras from your list


The SEARCH BAR can be used to quickly locate a specific camera in your list


To edit the settings for the camera tap the SETTINGS ARROW to the right of the camera name to access the EDIT CAMERA MENU


From the EDIT CAMERA MENU you can:


  • Rename the camera
  • Reconnect the camera if it's gone off line.
  • Reboot the camera

NOTE: The PASSWORD field, while editable, will NOT change the P2P password for your camera. (See the Security Code Menu section below).

Advanced Settings Menu









To view live video tap the image of your camera to access the LIVE VIEW menu


Live View

While your phone is in vertical orientation you can access all of the features available for your camera by clicking on the small icons located along the bottom of the screen:

F LiveView.png

  • Record Video
  • Take a Snapshot
  • Listen and Talk with Two-Way Audio: (XX60A PTZ requires external mic and speaker -not included)
  • Set Preset Position
  • Call Preset Position

While the phone is in horizontal orientation you can access:

  • Record Video
  • Take a Snapshot
  • Listen and Talk with Two-Way Audio: (XX60A PTZ requires external mic and speaker -not included)

F RotateNew.png

If your camera model has the ability to zoom - you will notice additional buttons added: F Zoom.png

To zoom your camera in and out you can either pinch/spread the image with your fingers or use the

Zoom In F ZoomI.png and Zoom Out F ZoomO.png icons.

Record Video

To record live video simply tap the video camera icon to access the RECORD CONTROL menu

F MotionRecord.png

From the RECORD CONTROL menu you can start and stop your recordings.

F RecordControl.png


To take snapshots simply tap the camera icon

F SnapShot.png

You will receive a message that a snapshot was successfully saved to your PHOTOS folder of your phone.

F SnapShotSaved.png

Listen and Talk with Two-Way Audio

Most of the AirSight IP camera models include an on-board microphone and speaker providing two-way audio communication.

F Audio.png

For AirSight IP camera models that do not (XX60A PTZ) an external microphone and speaker are required to utilize this feature.

Simply tap the speaker icon to access the AUDIO CONTROL menu


The audio status box will let you know what mode the camera is currently in: Mute, Listen, or Speak.

F AudioStatus.png


Most of the AirSight IP camera models can pan and tilt and some even have the ability to zoom.

Use the preset feature to program up to 16 preset positions for your camera to quickly retrieve later.

F Preset.png

To program a preset position, pan/tilt/zoom to the desired location and tap the PRESET SAVE icon

F PresetSave.png

A numbered menu appears - tap a number to program that preset position

F PresetSaveChoose.png

To call that preset position - tap the PRESET icon

F PresetGo.png

A numbered menu appears - tap a number to call that preset position

Your camera will pan/tilt/zoom to the appointed position that you set.

F PresetGoChoose.png

Exit Live View

To exit the Live View menu simply tap the BACK button to return to your camera list to view other cameras.

F Back.png


If MOTION DETECTION has been turned on in the ADVANCED SETTING MENU the app keeps record of each event in the EVENTS tab


To access the list of events for each camera tap the ARROW to the right of the camera name to access it's EVENT LIST

NewEventsArrow.png NewEventList.png

Use the SEARCH button to quickly navigate to a specific event based on when the event occurred


  • Note: Events cannot be deleted from the app - the only way to remove them from your phone is to delete the app.


Use the LOCALRECORD tab to access your VIDEO and SNAPSHOTS


Use the VIDEO and SNAPSHOT tabs at the top of the screen to navigate between them

Tap the ARROW to the right of the camera's name to access the PHOTO or VIDEO menu


Tap the PHOTO or VIDEO to view

NewPhotoView.png NewPhotoViewIcons.png

Use the DELETE and SAVE icons to discard or save to your PHOTOS folder on your phone.

If this is the first time saving PHOTOS or VIDEO tap OK when prompted


The app will notify you the image was saved successfully - tap OK to return to your list of photos or videos



Additional information on how to use these menus can be found here:

The ADD CAMERA menu lists all of the IP cameras found connected to the local network


Use the REFRESH button to refresh the list of cameras in "Camera Found! (0)" list if your camera doesn't automatically show up


Tap your camera in the "Camera Found! (0)" list to access the ADD CAMERA menu


If you are not at the physical location of the camera you can manually add it by tapping the ADD button to enter in the camera's credentials

NewManualAddCamera.png TheNewAddCameraMenu.png

You can also add your camera by scanning the QR code sticker on the label

  • Note: If you have trouble viewing the camera after using this method we recommend deleting the camera from the app and re-installing using the steps found HERE




Your current version of the app can be found on the APP INFO menu of the INFO tab


Related Products