Alarm Input Armed / IO Linkage on Alarm

Question

How do I setup my Airsight Cameras to use Alarm Input Armed / IO Linkage on Alarm?

---

Alarm Settings for Internet Explorer

If you want to connect external alarm devices:

• If it’s an alarm INPUT device, choose Alarm Input Armed to enable it
• If it’s an alarm OUTPUT device, choose IO Linkage on Alarm to enable it.

External Alarm: Set external alarm function ON/OFF.

Alarm Duration: Set external alarm output duration (Relay close time), can be Forever, 5s, 10s, 15s, 30s, 60s.

Lose SD-Card Alarm: Set alarm triggered ON/OFF if the SD-Card is lost.

Alarm Input: Set alarm input ON/OFF, it supports NO/NC external alarm device, choose the correct mode to make sure it works well, it refers to the I/O pin6 (Input2) and pin7 (Input1).

Action with Alarm: These are actions optional for external alarm triggered.

Alarm Settings for Safari, Chrome, Firefox

Click Alarm to enter the interface:

External Alarm: Set external alarm function ON/OFF.

Alarm Duration: Set external alarm output duration (Relay close time), can be Forever, 5s, 10s, 15s, 30s, 60s.

Lose SD-Card Alarm: Set alarm triggered ON/OFF if the SD-Card is lost.

Alarm Input: Set alarm input ON/OFF, it supports NO/NC external alarm device, choose the correct mode to make sure it works well, it refers to the I/O pin6 (Input2) and pin7 (Input1).

Action with Alarm: These are actions optional for external alarm triggered.