Difference between revisions of "Alarm Input Armed / IO Linkage on Alarm"

Latest revision as of 22:09, 9 February 2015

Question

How do I setup my Airsight Cameras to use Alarm Input Armed / IO Linkage on Alarm?

Answer

Alarm Settings for Internet Explorer

If you want to connect external alarm devices:

For alarm INPUT device, choose Alarm Input Armed to enable it
For alarm OUTPUT device, choose IO Linkage on Alarm to enable it.

External Alarm: Set external alarm function ON/OFF.

Alarm Duration: Set external alarm output duration (Relay close time), can be Forever, 5s, 10s, 15s, 30s, 60s.

Lose SD-Card Alarm: Set alarm triggered ON/OFF if the SD-Card is lost.

Alarm Input: Set alarm input ON/OFF, it supports NO/NC external alarm device, choose the correct mode to make sure it works well, it refers to the I/O pin6 (Input2) and pin7 (Input1).

Action with Alarm: These are actions optional for external alarm triggered.

Alarm Settings for Safari, Chrome, Firefox

Click Alarm to enter the interface:

External Alarm: Set external alarm function ON/OFF.

Alarm Duration: Set external alarm output duration (Relay close time), can be Forever, 5s, 10s, 15s, 30s, 60s.

Lose SD-Card Alarm: Set alarm triggered ON/OFF if the SD-Card is lost.

Alarm Input: Set alarm input ON/OFF, it supports NO/NC external alarm device, choose the correct mode to make sure it works well, it refers to the I/O pin6 (Input2) and pin7 (Input1).

Action with Alarm: These are actions optional for external alarm triggered.

IO Pins for IO Alarm Linkage

I/O PINS:

Output
Output
Alarm Input
Input (GND)

Output pins: Output pins (1 & 2) can be used to enable IO linkage on alarm.

For example, you might connect an external siren to sound when motion is detected.

You can also manually control the output switches via the WebUI buttons & to turn the connected device ON/OFF.

Input pins: Input pins (3 & 4) can be used for 1-way external sensor input to the camera.

For example, you might connect an external Passive Infrared (PIR) Sensor to it triggered the camera to send an e-mail and/or trigger the siren attached to the Output Pins (above).

If you link an external alarm device to Pins 3 and 4, when Alarm Input Enable is selected, the external alarm is armed.

NOTE: All pins work as a switch only.

@@ Line 9: / Line 9: @@
 ==Alarm Settings for Internet Explorer==
-If you want to connect external alarm devices, when it’s an alarm input device, choose '''Alarm Input Armed''' to enable it, when it’s an output device, choose '''IO Linkage on Alarm''' to enable it.
+If you want to connect external alarm devices:
+*For alarm '''INPUT''' device, choose '''Alarm Input Armed''' to enable it
+*For alarm '''OUTPUT''' device, choose '''IO Linkage on Alarm''' to enable it.
 [[Image:IOLINKAGEfirst.png]]
@@ Line 60: / Line 63: @@
 [[Image:IOLINKAGE12.png]]
+==IO Pins for IO Alarm Linkage==
+[[Image:ALARMINPUT4.png]]
+===I/O PINS:===
+# '''Output'''
+# '''Output'''
+# '''Alarm Input'''
+# '''Input (GND)'''
+'''Output pins:''' Output pins (1 & 2) can be used to enable IO linkage on alarm.
+* For example, you might connect an external siren to sound when motion is detected.
+* You can also manually control the output switches via the WebUI buttons [[Image:ALARMINPUT5.png]] & [[Image:ALARMINPUT6.png]] to turn the connected device ON/OFF.
+'''Input pins:''' Input pins (3 & 4) can be used for 1-way external sensor input to the camera.
+* For example, you might connect an external Passive Infrared (PIR) Sensor to it triggered the camera to send an e-mail and/or trigger the siren attached to the Output Pins (above).
+* If you link an external alarm device to Pins 3 and 4, when '''Alarm Input Enable''' is selected, the external alarm is armed.
+'''NOTE:''' All pins work as a switch only.
 [[category: Configuration]]