Experiment With Magnet Placement

From X10Wiki
Revision as of 02:19, 18 June 2014 by X10douglas (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Question

I am installing my Door/Window sensor, but I cannot position the magnet and sensor so that their arrows are pointing exactly at each other. What can I do?

Answer

The magnet and switch can work in other configurations besides having the arrows pointing at each other.

You can generally rotate the magnet 90 degrees, or leave a gap of up to about 1/4 inch, and it will still work OK.


  • Arm the console before testing magnet positions. Test the position by opening and closing the door or window; if the LED on the DS12A blinks when the door/window is opened, and again when it is closed, then the magnet is close enough.


  • To cover larger gaps or when using with molding, we recommend using a shim to bring the magnet closer.


  • Lastly - you could also try using a different, stronger magnet, instead of the magnets we provide.


We cannot recommend any particular magnet sellers; but do suggest trying a Google Products search for RARE EARTH MAGNET.


Related Articles

Adding A Switch To A Door Sensor