Difference between revisions of "Finding the Channel Switch on Wireless Cameras"

From X10Wiki
Jump to navigation Jump to search
 
Line 23: Line 23:
  
 
For good reception, put all of the cameras and the Video Receiver on the same channel number. You can experiment to find which channel works the best for you.
 
For good reception, put all of the cameras and the Video Receiver on the same channel number. You can experiment to find which channel works the best for you.
 +
 +
  
 
===Related Articles===
 
===Related Articles===
Line 28: Line 30:
 
[[Troubleshooting Camera Switching]]
 
[[Troubleshooting Camera Switching]]
  
Key Topics: camera, switch, multi, multiple, on, off, group
 
  
Relates to: XX11A, XX12A, XX16A, XX17A, XC10A, XC18A, XC19A
 
  
 
[[Category:troubleshooting]]
 
[[Category:troubleshooting]]
 
[[Category:frequently asked questions]]
 
[[Category:frequently asked questions]]

Latest revision as of 18:26, 28 May 2014

Questions

Where is the ABCD channel switch on the camera?

How do I change the channel/frequency on the camera?

Answer

The A, B, C, and D channel switch on each camera is located under the gray rubber plug next to the lens. If you point the camera at yourself with the antenna at the top, the bottom position of the switch corresponds to A on the receiver, and the top position corresponds to D. Make sure to replace the rubber plug if you are using the X10 camera outdoors.

A00000 00.gif A00022 05.jpg A00000 00.gif A00022 03.jpg


X10 cameras and Video Senders use the following frequencies:

  • Channel A: 2.411 GHz
  • Channel B: 2.434 GHz
  • Channel C: 2.453 GHz
  • Channel D: 2.473 GHz


For good reception, put all of the cameras and the Video Receiver on the same channel number. You can experiment to find which channel works the best for you.


Related Articles

Troubleshooting Camera Switching