Difference between revisions of "IP Camera - Remote Viewing for SD"

From X10Wiki
Jump to navigation Jump to search
Line 31: Line 31:
 
*The Media Port and Web Port you selected
 
*The Media Port and Web Port you selected
 
*The details of any port forwarding rules you have set up for your cameras
 
*The details of any port forwarding rules you have set up for your cameras
 +
 +
 +
 +
If you've followed the steps in the Owner's Manual and are still having difficulty understanding such things as "Port Forwarding" etc., you might find this site useful:
 +
 +
http://ipcamnetwork.wordpress.com/2010/09/23/acessing-your-camera-from-the-internet/
 +
 +
[http://forums.x10.com/index.php?topic=28301.msg158909#msg158909 Click here to see a port forwarding guide!]

Revision as of 00:00, 16 May 2014

Question

How can I view my IP camera over the Internet?

Answer

Please follow these instructions to connect to the AirSight SD over the Internet. First, you will need to enter your external IP address - visit http://www.whatismyip.com/ on a PC on the same WiFi or Ethernet network as the camera. An example might be http://11.11.11.11/ . You will also need to make sure that port forwarding is enabled on the Media Port and Web Port in Basic Network Settings, from your external IP address to the camera`s internal IP address.


Next, go to http://www.canyouseeme.org/ and run the test on that page. Enter the IP camera port in the "Specific Port" field and click "Check Port". If you get results of "Error: I could not see your service on <YOURIPADDRESS> on port <YOURPORT>", then you will need to set up port forwarding.


Setting a Fixed IP Address

We recommend that you set a fixed IP address for your camera before you set up port forwarding.

Port Forwarding

If you get results of NETWORK TRANSLATION: YES and CONNECTION SUCCESS: NO, you will need to make sure that port forwarding is enabled on that port (and the Media Port), from your external IP address to the camera`s internal IP address. (Note that this test will not say CONNECTION SUCCESS:YES after port forwarding is set up correctly! That is because your PC has a different internal IP address than your camera.) For information about port forwarding go to http://portforward.com and look at their FREE guides. At that site, click on Router List, then your router`s model name and number, then click Skip Advertisement. On the next page, scroll down until you find the link to load the Default Guide for your router and follow its instructions.


Once you have set that up and can access the camera by entering the IP address and Web Port into a web browser. An example might be http://11.11.11.11:8001/ if the external IP was 11.11.11.11 and the port you selected was 8001. Next, you can check Device Info and look in DDNS Status for the DDNS address.


If you cannot connect after following these instructions, please write down all of this information before you contact technical support:


  • Your external IP address
  • The internal IP address of your camera
  • The make and model number of your router
  • The Media Port and Web Port you selected
  • The details of any port forwarding rules you have set up for your cameras


If you've followed the steps in the Owner's Manual and are still having difficulty understanding such things as "Port Forwarding" etc., you might find this site useful:

http://ipcamnetwork.wordpress.com/2010/09/23/acessing-your-camera-from-the-internet/

Click here to see a port forwarding guide!