Difference between revisions of "Improving Remote Control Range"

From X10Wiki
Jump to navigation Jump to search
 
Line 1: Line 1:
== EDIT ME ==
+
== Questions ==
  
[[Category:needed pages]]
+
'''What can I do to improve the range of my remote controls?'''
 +
 
 +
Answer
 +
 
 +
If you are having problems with your remote control, it is always a good idea to first make sure you have fresh batteries in it.
 +
 
 +
Your remote controls use radio frequency ("RF") signals to communicate with the ActiveHome Pro USB Interface (CM15A), so it is best to set up the interface for best reception. Here are some options to try: *Move the antenna on the interface so it is sticking straight out from the body of the box. In many cases, this will improve reception range significantly. *Download and store all of your timers and macros into the interface; then unplug it from its USB cable. Sometimes noise from your computer can travel on the USB cable and cause interference for X10 remote commands. *Try moving the interface itself to an outlet away from your computer and monitor. You can use an extension cord or power strip--but not a surge protector--to get it higher off the ground, where it may be easier to receive the signals.
 +
 
 +
=== Related Articles ===
 +
 
 +
[[Troubleshooting Remote Controls in ActiveHome Pro]]
 +
 
 +
Key Topics: remote, control, rf, radio, frequency, receive, transmit, power, line, transceive, house, code
 +
 
 +
Relates to: CM15A, SW31A
 +
 
 +
[[Category:troubleshooting]]

Revision as of 18:05, 16 March 2006

Questions

What can I do to improve the range of my remote controls?

Answer

If you are having problems with your remote control, it is always a good idea to first make sure you have fresh batteries in it.

Your remote controls use radio frequency ("RF") signals to communicate with the ActiveHome Pro USB Interface (CM15A), so it is best to set up the interface for best reception. Here are some options to try: *Move the antenna on the interface so it is sticking straight out from the body of the box. In many cases, this will improve reception range significantly. *Download and store all of your timers and macros into the interface; then unplug it from its USB cable. Sometimes noise from your computer can travel on the USB cable and cause interference for X10 remote commands. *Try moving the interface itself to an outlet away from your computer and monitor. You can use an extension cord or power strip--but not a surge protector--to get it higher off the ground, where it may be easier to receive the signals.

Related Articles

Troubleshooting Remote Controls in ActiveHome Pro

Key Topics: remote, control, rf, radio, frequency, receive, transmit, power, line, transceive, house, code

Relates to: CM15A, SW31A