Difference between revisions of "Manual Lens Adjustment"

Latest revision as of 17:34, 3 August 2016

How to make a manual lens adjustment on an XX60A: AirSight Outdoor PTZ P2P IP Camera:

1) Unscrew and remove the dome by rotating it counterclockwise.

2) Locate and remove the screw at the base of the lens.

3) Gently twist and pull up on the lens to make the adjustment.

4) Continue to make slight adjustments until the image is focused.

5) Replace the screw at the base of the lens and replace the dome by rotating it clockwise.

@@ Line 1: / Line 1: @@
-==How to make a manual lens adjustment on an XX60A: AirSight Outdoor PTZ P2P IP Camera==
+'''How to make a manual lens adjustment on an XX60A: AirSight Outdoor PTZ P2P IP Camera:'''
-'''Before installing your AirSight camera please remove the foam insert from inside the camera:'''
+) Unscrew and remove the dome by rotating it counterclockwise.
-Unscrew and remove the dome by rotating it counterclockwise.
+[[File:Dome3.png]]
-[[Image:Dome1.png]]
+) Locate and remove the screw at the base of the lens.
-Remove the protective foam insert from inside the camera
-[[Image:Dome2.png]]
+[[File:XX60ASCREW.png]]
-[[Image:Dome3.png]]
+) Gently twist and pull up on the lens to make the adjustment.
-Replace the dome by rotating it clockwise.
+[[File:XX60ATWIST.png]]
-Remove the protective film from the dome.
+) Continue to make slight adjustments until the image is focused.
-[[Image:Dome1.png]]
+[[File:XX60AB4NAFTER.png]]
+) Replace the screw at the base of the lens and replace the dome by rotating it clockwise.