Mini Controller LED Stays On

From X10Wiki

Revision as of 19:59, 20 May 2014 by X10douglas (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Question

The LED on my Mini Controller is always lit, and it no longer seems to send commands. What can I try?

Answer

This typically indicates that one of the buttons might be stuck. Examine them closely and pop any stuck buttons out.

Check that a cell phone charger or other device is not plugged into a nearby outlet. Sometimes this will happen where unplugging the interfering device will cause the light to go out and signals to again be sent.

Try unplugging and re-plugging the mini controller or using a different outlet.

Retrieved from "https://kbase.x10.com/index.php?title=Mini_Controller_LED_Stays_On&oldid=11217"