Difference between revisions of "Mini Timer Troubleshooting"
Jump to navigation
Jump to search
X10douglas (talk | contribs) |
X10douglas (talk | contribs) |
||
| Line 2: | Line 2: | ||
| − | + | '''1) Is it flashing 18:88?''' | |
| − | |||
| − | + | *YES = [[18:88 Error]] | |
| − | |||
| − | |||
| − | |||
| − | + | *NO = Go to Step 2 | |
| − | + | '''2) Does it light up when you plug it in? Does a red light come on when you press a On/Off button? Does the clock keep accurate time?''' | |
| − | |||
| − | + | *YES = Go to Step 3 | |
| − | = | + | *N0 = If the MiniTimer does not light up at all then it may have an issue. |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | '''3) Can you control all your modules by pushing the buttons on the MiniTimer?''' | |
| + | |||
| + | *YES = Go to Step 4 | ||
| + | |||
| + | *NO = [[MiniTimer Module Control]] | ||
| + | |||
| + | |||
| + | '''4) When you set a timer, does it run if you make sure the 1-4/5-8 switch is in the correct position and you make sure you have AM/PM correct?''' | ||
| + | |||
| + | *YES = Go to Step 5 | ||
| + | |||
| + | *NO = Double-check that your answer to 3 is Yes; if so, your MiniTimer may have an issue. | ||
| + | |||
| + | |||
| + | '''5) Are you having difficulties deleting an existing timer?''' | ||
| + | |||
| + | *YES = [[Deleting Stored MiniTimer Events]] | ||
| + | |||
| + | *NO = Please email '''support@x10.com''' with a detailed description of the problem you are experiencing. | ||
| + | |||
'''If you have problems answering these questions, please refer to [[MiniTimer Setup]].''' | '''If you have problems answering these questions, please refer to [[MiniTimer Setup]].''' | ||
Revision as of 20:05, 20 May 2014
If you have problems answering these questions, please refer to MiniTimer Setup.
1) Is it flashing 18:88?
- YES = 18:88 Error
- NO = Go to Step 2
2) Does it light up when you plug it in? Does a red light come on when you press a On/Off button? Does the clock keep accurate time?
- YES = Go to Step 3
- N0 = If the MiniTimer does not light up at all then it may have an issue.
3) Can you control all your modules by pushing the buttons on the MiniTimer?
- YES = Go to Step 4
4) When you set a timer, does it run if you make sure the 1-4/5-8 switch is in the correct position and you make sure you have AM/PM correct?
- YES = Go to Step 5
- NO = Double-check that your answer to 3 is Yes; if so, your MiniTimer may have an issue.
5) Are you having difficulties deleting an existing timer?
- NO = Please email support@x10.com with a detailed description of the problem you are experiencing.
If you have problems answering these questions, please refer to MiniTimer Setup.