Mini Timer Troubleshooting

From X10Wiki
Revision as of 19:54, 10 June 2015 by X10douglas (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

If you have problems answering these questions, please refer to MiniTimer Setup.


1) Is it flashing 18:88?

  • NO = Go to Step 2


2) Does it light up when you plug it in? Does a red light come on when you press a On/Off button? Does the clock keep accurate time?

  • YES = Go to Step 3
  • NO = If the MiniTimer does not light up at all then it may have an issue - please contact support@x10.com with your findings.


3) Can you control all your modules by pushing the buttons on the MiniTimer?

  • YES = Go to Step 4


4) When you set a timer, does it run if you make sure the 1-4/5-8 switch is in the correct position and you make sure you have AM/PM correct?

  • YES = Go to Step 5
  • NO = Double-check that your answer to 3 is Yes; if so, your MiniTimer may have an issue - please contact support@x10.com with your findings.


5) Are you having difficulties deleting an existing timer?

  • NO = Please email support@x10.com with a detailed description of the problem you are experiencing.


If you have problems answering these questions, please refer to MiniTimer Setup.