Difference between revisions of "Modules Turn On Immediately After Being Turned Off"

From X10Wiki
Jump to navigation Jump to search
Line 4: Line 4:
  
 
== Answer ==
 
== Answer ==
This is usually caused by the lamp or appliance being controlled by the X10 module. There are components in X10 modules that detect the switching of the physical switch on the controlled device (fluorescent lamps are common culprits). With certain devices, false signals are generated (usually from a dissipating charge), which trigger the local control feature in the module. To fix this problem, you can plug a cube tap (plug splitter) into the Module, and then plug a 7�W night light into the same Module along with the offending light/appliance.
+
This is usually caused by the lamp or appliance being controlled by the X10 module. There are components in X10 modules that detect the switching of the physical switch on the controlled device (fluorescent lamps are common culprits). With certain devices, false signals are generated (usually from a dissipating charge), which trigger the local control feature in the module. To fix this problem, you can plug a cube tap (plug splitter) into the Module, and then plug a 7W night light into the same Module along with the offending light/appliance.
  
 
[[category: Hardware]]
 
[[category: Hardware]]

Revision as of 18:13, 5 May 2006

Questions

Why does my Lamp or Appliance Module turn on immediately after being turned off?

Answer

This is usually caused by the lamp or appliance being controlled by the X10 module. There are components in X10 modules that detect the switching of the physical switch on the controlled device (fluorescent lamps are common culprits). With certain devices, false signals are generated (usually from a dissipating charge), which trigger the local control feature in the module. To fix this problem, you can plug a cube tap (plug splitter) into the Module, and then plug a 7W night light into the same Module along with the offending light/appliance.