Modules Turn On Immediately After Being Turned Off

From X10Wiki
Revision as of 22:31, 20 May 2014 by X10douglas (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Questions

Why does my Lamp or Appliance Module turn on immediately after being turned off?

Why does a low-wattage light connected to my Lamp or Appliance Module flicker after being turned off?

Answer

If modules turn ON unpredictably, it is most likely that the modules may have been triggered by a 120V AC power "dip" or "brown out".

X10 Lamp and Appliance Modules have a feature called "local control". This feature lets you turn the X10 module on by turning the physical power switch of the controlled light/appliance off and then on again.

The local control circuit, by design, is very sensitive. False signals can be generated (usually from a dissipating charge), triggering the local control feature and interpreted as a request to turn on.


Disabling the Local Control Feature:

  • Plug a 7 Watt night light into the same cube tap as the light/appliance you are looking to control.


When the module is ON, the appliance and night light will be ON. When the module is OFF, the appliance and the night light will be OFF. Now, if you operate the power switch on the appliance, the night light is always "in circuit" so the Appliance Module's local control circuit is disabled.



Cubetap.png


Related Articles

Local Control for Lamp And Appliance Modules

Identifying and Troubleshooting Powerline Noise and Control Problems