Modules Turn On or Off by Themselves

From X10Wiki
Revision as of 21:37, 20 May 2014 by X10douglas (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Question

Why do some modules sometimes turn on and off by themselves?

Answer

Certain devices in your house can cause electrical interference. Devices such as baby monitors, wireless intercom systems, or anything that transmits signals over the house wiring might interfere with X10 codes. Televisions and computers can also transmit noise, even if turned off. This interference can stop X10 signals from getting to the right module(s), causing intermittent control.

In some cases, it is possible for this noise to change a transmitted code into a different one, which might cause the wrong module to turn on or off. The easiest way to determine whether or not a household device is causing interference is to unplug it entirely. If this fixes the problem you may consider plugging the offending appliance into an X10 Noise Filter XPPF found here.


Related Articles

Identifying and Troubleshooting Powerline Noise and Control Problems

Switch Turns On But Not Off

Switch Turns Off But Not On

Modules Work in Some Locations but not Others

Modules Turn On Immediately After Being Turned Off

Fluorescent Lights