Difference between revisions of "Motion Sensors with a Camera System"

From X10Wiki
Jump to navigation Jump to search
Line 12: Line 12:
 
*Mount the Motion Sensor so movement generally cuts across the Motion Detector's field of view as opposed to approaching it head-on.
 
*Mount the Motion Sensor so movement generally cuts across the Motion Detector's field of view as opposed to approaching it head-on.
  
http://graphics.x10.com/images7/tech_motion_path_comparison2.gif
+
[[Image:tech_motion_path_comparison2.gif]]
  
 
Sensor Detection vs. Motion Direction
 
Sensor Detection vs. Motion Direction

Revision as of 00:19, 21 May 2014

Introduction

The following document covers the integration of HawkEye (MS13A), EagleEye (MS14A), and ActiveEye (MS16A) Motion Sensors into an existing X10 camera system. The cameras should already be configured and tested with a PalmPad remote or other controller. Motion sensors should also already be properly configured.

See the 'Related Articles' section for instructions on configuring Motion Sensors, single XCams, and multiple XCams.

Setup

Configuring Motion Sensors For Use With Cameras

If you wish to turn on a camera when someone enters an area of camera surveillance, try the steps below:

  • Program the Motion Sensor to the same House/Unit code as the camera's Addressable Power Supply.
  • Using the HOUSE/ON and UNIT/OFF buttons located in the Motion Sensor's battery compartment, try turning the camera on and off.
  • Mount the Motion Sensor so movement generally cuts across the Motion Detector's field of view as opposed to approaching it head-on.

Tech motion path comparison2.gif

Sensor Detection vs. Motion Direction

  • Test the system by walking into the monitored area. Note: Remember that the Motion Sensor times out for 10 seconds each time it is tripped. When you leave the area, wait for the Motion Sensor to send the OFF command (depending on its No Motion Delay off command setting, followed by 10 seconds). For testing purposes, use your remote to turn off the camera after the sensor turns on the camera.
  • Adjust the location of the Motion Sensor as necessary to achieve the best detection.
  • Any additional cameras should be configured the same way. The Unit codes should all be within the same Unit code group associated with the Addressable Power Supplies.

Behind The Scenes

If you are a first time user of our Motion Sensors, a key point to remember is the Motion Sensors are essentially modified remote controls. They are activated by motion, rather than an ON/OFF button being pressed.

Frequently Asked Questions

Is it absolutely necessary that the Motion Sensor be set to the same House/Unit code as the camera?

No; however, additional equipment is required if it is not. If you own MultiView, the Motion Sensor triggers the MultiView software. The software switches between cameras. If you have ActiveHome Pro and iWitness, you could configure a macro that, when triggered by the Motion Sensor, turns a camera on (a Lamp Module can be activated, too).

Related Articles

Using Your Camera as a Web Cam

Key Topics: camera, web, cam, internet

Relates to: SW15A, VA11A

Multiple Cameras with One Video Receiver

Key Topics: multi, multiple, camera, video, receiver, switch

Relates to: XX11A, XX12A, XX16A, XX17A, XC10A, XC18A, XC19A, VR36A, VR31A

Finding the Channel Switch on Wireless Cameras

Key Topics: xcam2, wireless, camera, switch, plug, ABCD, frequency, channel

Relates to: XX11A, XX12A, XX16A, XX17A, XC10A, XC18A, XC19A

Camera Range

Key Topics: camera, rf, range, distance, 100, feet, radio, frequency, transmit, send

Relates to: XX11A, XX12A, XX16A, XX17A, XC10A, XC18A, XC19A

PAL and S-Video Availability

Key Topics: pal

Relates to: XX11A, XX12A, XX16A, XX17A, XC10A, XC18A, XC19A, VR36A, VR31A, SC15A, SC16A, SC18A, SC23A

Troubleshooting Camera Picture on TV

Key Topics: video, camera, xcam2, picture, tv, display, image, channel, input

Relates to: XX11A, XX12A, XX16A, XX17A, XC10A, XC18A, XC19A, VR36A, VR31A

Other 2.4 GHz Device Compatibility

Key Topics: 2.4, ghz, interference, static, noise, frequency, radio, camera, wireless, wifi

Relates to: XX11A, XX12A, XX16A, XX17A, XC10A, XC18A, XC19A, VR36A, VR31A

Are X10 Cameras Waterproof

Key Topics: weather, water, proof, waterproof, outdoor, outside, temperature, cold

Relates to: XX11A, XX12A, XX16A, XX17A, XC10A, XC18A, XC19A, VR36A, VR31A

HawkEye Motion Sensor Setup

Relates to: MS12A

HawkEye II Motion Sensor Setup

Relates to: MS13A

Eagle Eye Motion Sensor Setup

Relates to: MS14A

Active Eye Motion Sensor Setup

Relates to: MS16A