Ninja Presets With Remote

From X10Wiki
Revision as of 20:26, 18 September 2006 by Ericb (talk | contribs)
Jump to navigation Jump to search

Questions

How do I store preset positions with my remote?

Answer

===Buttons P1 thru P4 are used to store 4 position settings for the camera===

  1. To store the first position for the camera, press the BLUE buttons to

scan to the position you want. Move the switch at the bottom from Normal to Program. Press P1.

  1. To store the second position for the camera, press the BLUE buttons to

scan to the position you want. Move the switch at the bottom from Normal to Program. Press P2.

  1. To store the third position for the camera, press the BLUE buttons to

scan to the position you want. Move the switch at the bottom from Normal to Program. Press P3.

  1. To store the fourth position for the camera, press the BLUE buttons to

scan to the position you want. Move the switch at the bottom from Normal to Program. Press P4. Move the switch back to Normal.

To clear all stored positions:

Move the switch at the bottom to Program. Press Center then move the switch back to Normal.

WITH THE SWITCH SET TO NORMAL:

Press P1, P2, P3 or P4 to move to any of the 4 positions stored for the camera. Press Center to center the position for the camera. Press Sweep to sweep through all 4 positions stored for the camera. To stop scanning or movement to a stored position: Press any BLUE key on the remote while the camera is moving to stop the movement.

Related Articles