Difference between revisions of "PAO11"

From X10Wiki
Jump to navigation Jump to search
 
(6 intermediate revisions by the same user not shown)
Line 1: Line 1:
=='''X10 SR227 and PRO PAO11: Half-Switched SuperSocket Wall Receptacle Module'''==
+
'''X10 SR227 and PRO PAO11: Half-Switched SuperSocket Wall Receptacle Module'''
 
+
[[File:sr227_500.jpg|right||sr227|link=]]
[[Image:Thumb_sr227.jpg]]
 
  
  
Line 17: Line 16:
 
;Weight:  0.44 lbs.   
 
;Weight:  0.44 lbs.   
 
;Power Supply:  120VAC @ 60Hz   
 
;Power Supply:  120VAC @ 60Hz   
;Minimum Load: 40W
+
;Minimum Load: 40W: ''Lamps/Loads rated below 40W may flicker and/or operate erratically.''
 
;Rating: 15A, 1800W   
 
;Rating: 15A, 1800W   
 +
 +
 +
 +
;Operating Environment:  Indoors
 +
;Operating Temperature Range:  32deg to 104deg F (0deg to 40deg C)
 +
;Operating Humidity Range:  0-90% Relative Humidity
 +
;Storage Temperature Range:  -4deg to 158deg F (-20deg to 70deg C)
  
  
  
 
==Related Articles==
 
==Related Articles==
[[Appliance Modules]]
+
[[Receptacles]]
 +
 
 +
 
 +
 
 +
==Questions==
 +
 
 +
[[Modules Work in Some Locations but not Others|Why do some modules work in some outlets and not in others?]]
 +
 
 +
[[Modules Turn On or Off by Themselves|Why do some modules sometimes turn on and off by themselves?]]
 +
 
 +
[[Switch Turns Off But Not On|Modules can be turned off but not turned on from the X10 powerline signal. What might cause this? ]]
 +
 
 +
[[Switch Turns On But Not Off|Why does my Appliance Module turn on but not off?]]
 +
 
 +
[[Modules Turn On Immediately After Being Turned Off|Why does my Appliance Module turn on immediately after being turned off?]]
 +
 
 +
[[256 Possible Addresses|Since there are 256 possible addresses, am I limited to 256 controlled devices?]]
 +
 
 +
[[Amperage vs. Wattage vs. Horsepower|How do I know if I the module I have selected has enough power? ]]
 +
 
 +
[[Amperage vs. Wattage vs. Horsepower|Can horsepower be converted to amps, and vice versa? ]]
 +
 
 +
[[Circuit Interrupters And X10|I have an GFI / GFCI outlet- can I control this with X10? ]]
 +
 
  
  

Latest revision as of 19:10, 27 August 2015

X10 SR227 and PRO PAO11: Half-Switched SuperSocket Wall Receptacle Module

sr227


Product Pages


Specifications

Weight
0.44 lbs.
Power Supply
120VAC @ 60Hz
Minimum Load
40W: Lamps/Loads rated below 40W may flicker and/or operate erratically.
Rating
15A, 1800W


Operating Environment
Indoors
Operating Temperature Range
32deg to 104deg F (0deg to 40deg C)
Operating Humidity Range
0-90% Relative Humidity
Storage Temperature Range
-4deg to 158deg F (-20deg to 70deg C)


Related Articles

Receptacles


Questions

Why do some modules work in some outlets and not in others?

Why do some modules sometimes turn on and off by themselves?

Modules can be turned off but not turned on from the X10 powerline signal. What might cause this?

Why does my Appliance Module turn on but not off?

Why does my Appliance Module turn on immediately after being turned off?

Since there are 256 possible addresses, am I limited to 256 controlled devices?

How do I know if I the module I have selected has enough power?

Can horsepower be converted to amps, and vice versa?

I have an GFI / GFCI outlet- can I control this with X10?