From X10Wiki
Revision as of 19:10, 27 August 2015 by X10douglas (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

X10 SR227 and PRO PAO11: Half-Switched SuperSocket Wall Receptacle Module


Product Pages


0.44 lbs.
Power Supply
120VAC @ 60Hz
Minimum Load
40W: Lamps/Loads rated below 40W may flicker and/or operate erratically.
15A, 1800W

Operating Environment
Operating Temperature Range
32deg to 104deg F (0deg to 40deg C)
Operating Humidity Range
0-90% Relative Humidity
Storage Temperature Range
-4deg to 158deg F (-20deg to 70deg C)

Related Articles



Why do some modules work in some outlets and not in others?

Why do some modules sometimes turn on and off by themselves?

Modules can be turned off but not turned on from the X10 powerline signal. What might cause this?

Why does my Appliance Module turn on but not off?

Why does my Appliance Module turn on immediately after being turned off?

Since there are 256 possible addresses, am I limited to 256 controlled devices?

How do I know if I the module I have selected has enough power?

Can horsepower be converted to amps, and vice versa?

I have an GFI / GFCI outlet- can I control this with X10?