From X10Wiki
Revision as of 00:27, 5 April 2007 by Ericb (talk | contribs)
Jump to navigation Jump to search


Error creating thumbnail: /bin/bash: /usr/bin/convert: No such file or directory Error code: 127

Model: PF284

The PSC01 Powerflash Module is different from most other X10 modules - it sends X10 codes rather than receiving them. It can be triggered by a dry contact closure or a low voltage input (6-18 volts AC, DC, or audio). When connected to the output of a burglar alarm system or alarm panel, it can flood your house with light when the alarm is tripped. This device can be activated by a magnetic window switch, photo cell, moisture sensor, motion detector, pressure switch or anything that gives a switch closure. Applications for this versatile interface are limited only by your imagination. It can trip lights directly or activate sophisticated macros in ActiveHome Pro.

Product Pages




How do I set up my Powerflash module?


0.32 lbs.
Power Supply
120VAC @ 60Hz
Terminal Voltage
6V min, 18V max
Input Switch Position A
6 - 18VDC
Input Switch Position B
Dry Contact Closure

Related Products

ActiveHome Pro

Appliance Modules

Wall Switch Modules

Security Systems