Problems Learning IR Codes

Questions What should I do when my VCR Commander will not accept IR codes during programming? Answer If you are having trouble getting the VCR Commander to accept input from your remote, try the following:

• Verify that the VCR Commander is connected to a functional outlet.
• Check that the IR emitter cable is NOT connected to it.
• Make sure that the batteries in VCR remote are no more than six months old.
• Aim the VCR remote at IR target on the back of the VCR Commander when sending commands.
• Always hold the VCR remote within one inch of this IR target.
• See if the UX21A/UX23A VCR Commander or VCR Commander II has been properly entered into �Learn IR� mode.

After verifying each of the above steps, clear the IR memory in the VCR Commander and attempt to relearn the IR codes once more. #4: [img src="" border=2] Related Articles [a href="/kbase/articles/a00039.html"]a00039[/a] : Setting Up and Learning with VCR Commander[BR] Key Topics: ir, learn, command, commander, play, stop, record, remote, infrared Relates to: UX21A, UX23A, MS12A, MS13A, MS14A, MS16A [img src="http://site.x10.com/?Z3gxT2tiYXNlYXJ0aWNsZTEuZGF0=RND%7Ckbasearticle"]