Setup to Email Pictures From Vanguard Software

From X10Wiki
Revision as of 22:18, 16 March 2006 by X10admin (talk | contribs) (Perl Automatic Add)
Jump to navigation Jump to search

Questions How do I setup my software to email me pictures? Answer Follow these steps to setup Vanguard software to email snapshots when motion is detected:

  • Click on the Options tab on the right-hand side. Once Options is open, select the Motion tab on the left-hand side, and you should see the screen below:

[img src="a00261_01.gif"][/l1>

  • Add the desired motion sensor; select its House/Unit code from the drop-down menu, and then select the camera you would like to associate with that motion sensor.
  • Click the Configure button to bring up the motion sensor configuration window as shown below:

[img src="a00261_02.gif"][/l1>

  • Set the desired frequency and duration for the action.
  • Click OK; then click on the Email tab and you will see the screen below:

[img src="a00261_03.gif"][/l1>

  • Enter the appropriate email address information, and add it to the address book; then select OK.

Repeat these steps for each additional camera you setup. Related Articles [img src=""]