Testing A KR15A On A2

From X10Wiki
Revision as of 20:17, 9 June 2014 by X10douglas (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


My Big Red Button does not seem to trigger my chime. What can I try?


Some Big Red Buttons do not send the A1 command properly, we recommend setting the Big Red Button to A2.

  • Open the battery cover and hold down UNIT until the LED blinks twice, then release.
  • Push and release UNIT; the light will blink on and off.
  • Push and release UNIT again; the light will blink on and off, stay off for 3 seconds, then blink twice.
  • Set your Chime Module to A2 and plug it in next to a Transceiver set to A.
  • If the Big Red Button does not trigger the chime reliably when it is nearby, then it may have an issue.