Using The SoundPower Remote

From X10Wiki
Revision as of 20:45, 10 June 2014 by X10douglas (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Question

How do I adjust the volume?

Answer

  • Press and release the AUDIO button. The LED blinks once.
  • Then pressand release button 4 (AMP). This puts the remote into the mode to control the VR32A Wireless Amplifier/Speaker Driver.
  • Press VOL+ to increase volume on both channels or VOL- to decrease volume on both channels.
  • Press CH+ to adjust balance to right channel, reducing left channel volume; CH- will adjust balance to left channel and reduce the right channel volume.
  • Press MUTE to toggle the audio output ON and OFF.