Using the iconRemote RF With The Remote RF Receiver

From X10Wiki
Revision as of 20:42, 10 June 2014 by X10douglas (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Question

How can I set up the iconRemote to control devices in a closed entertainment center cabinet?

Answer

When you add a Remote RF Receiver, you will be able to control your TV, cable box, DVD player, DVR and more using RF control. That means you can hide away all your devices in your entertainment center cabinet and control them through the doors! Plus, you can control them out of the direct line of sight from up to 100 feet away!


1. Plug Remote RF Receiver into a standard wall socket and set behind TV or inside entertainment center cabinet.

IR32A RF Transmitter Setup Step 1.gif

2. Place IR Emitter in front of device. Up to three devices can be controlled with included IR emitters - cable box, TV, DVD player, etc. If you do not have the IR emitter wire, please point the side with text on the Remote RF Receiver directly at the device you wish to control.

IR32A RF Transmitter Setup Step 2.gif

3. On the iconRemote RF, press Home. Then press Setup.

IR32A RF Transmitter Setup Step 3.gif

4. Press More, then press Wireless (RF).

IR32A RF Transmitter Setup Step 4.gif

5. The mode screen appears. Press the side key next to the device you want to set for RF control - a wireless icon will pop up over the device. Press OK.

IR32A RF Transmitter Setup Step 5.gif

6. You're done! Now you can control that device through your entertainment cabinet doors, across the room up to 100 feet away!

IR32A RF Transmitter Setup Step 6.gif