Using your Power over Ethernet (PoE) Adapter

From X10Wiki
Revision as of 22:00, 15 April 2014 by X10douglas (talk | contribs)
Jump to navigation Jump to search
PoE Adapters


How do I set up my AirSight camera with my X10 Power over Ethernet (PoE) adapter?


  • Make sure your Ethernet cable is 100 feet or shorter.
  • Plug the power supply into wall power near your router or switch.
  • Connect the Ethernet cable and power supply to the PoE adapter with the barrel jack (the "injector" adapter.)
  • Plug that PoE adapter into a LAN port on your router.
  • Plug the other PoE adapter with the silver plug (the "splitter" adapter) into the power port and Ethernet port on the camera.
  • Connect the other end of the Ethernet cable to the "splitter" adapter.

POE breakout.jpg