VA11A OK But No Video

From X10Wiki
Revision as of 22:05, 31 January 2007 by Ericb (talk | contribs) (→‎Answer)
Jump to navigation Jump to search


I don't get an error about the VA11A being installed, so why don't I get video in my software?

I checked my Device Manager and the VA11A is listed under Imaging Devices, so why don't I get video in my software?


Please perform these tests:

  1. Connect your video receiver directly to a TV and select the appropriate channel on the TV. Generally, this will be 3 or 4 for screw-on coaxial cable, and some VIDEO INPUT channel for the yellow RCA connection. Do you see a picture on the TV?
  1. Connect some other device with a video output to the VA11A. Examples include DVD players, VCRs, camcorders, video iPods, Playstations, or even the Video Out from your computer (make sure it`s turned on.) Do you see a picture on your computer?

If 1 is No and 2 is Yes, then the video receiver or camera is having problems. If 1 is Yes and 2 is No, then the VA11A itself is probably at issue. If both 1 and 2 are No, things are really not going well, and you should focus on getting a picture on the TV. If both 1 and 2 are Yes, then something unusual is happening. If you are using wireless cameras, look for potential interference sources near the computer.

Related Articles

Troubleshooting Video Display Errors on PC

Windows Prompts for Disk when Installing VA11A Video Capture

VA11A Driver Load Procedure for 98SE and ME

VA11A Driver Load Procedure for 2000 and XP

Key Topics: display, capture, adapter, digital, video, converter, device, imaging, usb

Relates to: VA11A, SW18A, SW19A, SW20A, SW21A, SW22A, SW26A, SW31A, SW30A, SW32A, SW33A