Vanguard Reset

From X10Wiki
Revision as of 20:46, 21 September 2006 by Ericb (talk | contribs) (→‎Answer)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


How do I reset my Vanguard camera to its original settings?


  1. Unplug the camera from power for 15 to 20 minutes.
  2. Plug the power back in.
  3. On the bottom of the camera, set the slide switch to "Program".
  4. Using the remote control, press the C1 button for a second or two.
  5. Set the slide switch on the camera back to either "Transmit Disable" or "Transmit Enable".
  6. Use the directional arrows on the remote to move the camera to confirm control.