View source for X-Ray Vision Reinstallation

==Question==

'''X-Ray Vision is crashing or locking up, and I've tried other strategies mentioned on this site. How can I reinstall X-Ray Vision?'''

==Answer==

Here is a complete re-install procedure for X-Ray Vision:

#Go to Control Panel | Add/Remove Programs and click on the ‘Add/Remove’ button for X-Ray Vision. Note: You may receive a message saying "Could Not Find Install.Log." If you get this, delete the folder at C:\Program Files\X-Ray Vision. Run the X-Ray Vision installer again, and repeat Step #1.
#A window will pop up asking if you would like to do an ‘Automatic’ or ‘Custom’ uninstall. Select ‘Custom.’
#Click on the ‘Select all’ button, and then the ‘next’ button on every screen in the Uninstall Wizard.
#Click ‘Finish.’ Repeat steps 1-4 for X-Ray Vision, X10 Hardware, and any other X10 software installed.
#Reboot the computer.
#Go to My computer | C: | Program files | Common files.
#Delete the ‘X10’ folder. If you receive a message that states you cannot delete this folder, go to step 8. If you can delete it, go to step 12.
#Press the Crtl, Alt, and Del buttons on your keyboard at the same time to bring up Task Manager.
#Click on Processes. End process for x10net.exe.
#Delete the ‘X10’ folder in the ‘Common Files’ folder.
#If this does not work, reboot the computer and repeatedly press F8 while it loads to bring up the Safe Mode menu. Boot into Safe Mode and delete the ‘X10’ folder in the ‘Common Files’ folder.
#Reboot the computer.
#Disconnect your VA11A Video Capture Adapter.
#Install the X-Ray Vision software and plug in the VA11A when prompted.
#Reboot the computer again.
 
The X-Ray Vision software should now operate correctly.