Difference between revisions of "XCam Anywhere Power Supply"

From X10Wiki
Jump to navigation Jump to search
Line 7: Line 7:
 
Both the SC15A and SC16A cameras take the D9100 (AKA PT31A) power supply. This supply plugs into a regular 110V/120VAC outlet and draws five watts. It outputs 9 volts of DC power at 100ma. It is an unregulated power supply, so it will only put out 9V DC with a 100ma load. The power supply has the positive contacts on the inside, and the negative on the outside--it is "tip-positive." The exterior diameter is 4.75mm; the interior is 1.7mm.  
 
Both the SC15A and SC16A cameras take the D9100 (AKA PT31A) power supply. This supply plugs into a regular 110V/120VAC outlet and draws five watts. It outputs 9 volts of DC power at 100ma. It is an unregulated power supply, so it will only put out 9V DC with a 100ma load. The power supply has the positive contacts on the inside, and the negative on the outside--it is "tip-positive." The exterior diameter is 4.75mm; the interior is 1.7mm.  
  
If you need a new power supply and do not have time to wait for one in the mail, call your local Radio Shack. Ask if they have parts 273-1770 and 273-1706 in stock; together, these should cost $25. You will get a 9 volt regulated power supply and the appropriate adapter to connect it to your camera.  
+
If you need a new power supply and do not have time to wait for one in the mail, call your local Radio Shack. Ask if they have parts 273-1767 and 273-1706 in stock; together, these should cost $15.99. You will get a 9 volt regulated power supply and the appropriate adapter to connect it to your camera.  
  
 
[[Image:Adaptaplugc.jpg]] [[Image:Pluginsc16a.jpg]]
 
[[Image:Adaptaplugc.jpg]] [[Image:Pluginsc16a.jpg]]

Revision as of 21:35, 28 June 2006

Question

What power supply does the SC15A or SC16A require?

Answer

Both the SC15A and SC16A cameras take the D9100 (AKA PT31A) power supply. This supply plugs into a regular 110V/120VAC outlet and draws five watts. It outputs 9 volts of DC power at 100ma. It is an unregulated power supply, so it will only put out 9V DC with a 100ma load. The power supply has the positive contacts on the inside, and the negative on the outside--it is "tip-positive." The exterior diameter is 4.75mm; the interior is 1.7mm.

If you need a new power supply and do not have time to wait for one in the mail, call your local Radio Shack. Ask if they have parts 273-1767 and 273-1706 in stock; together, these should cost $15.99. You will get a 9 volt regulated power supply and the appropriate adapter to connect it to your camera.

Adaptaplugc.jpg Pluginsc16a.jpg

9 volt adapter

Adaptaplug: C