Difference between revisions of "Xcam2 Battery Setup"
Jump to navigation
Jump to search
X10MichaelC (talk | contribs) |
m (category) |
||
| Line 1: | Line 1: | ||
== Questions == | == Questions == | ||
| − | How do I setup my battery pack with the X10 camera? | + | '''How do I setup my battery pack with the X10 camera?''' |
== Answer == | == Answer == | ||
The XCam2 camera is normally powered from a small plug-in AC power supply. But with the ZB11A battery pack, you can now take your XCam2 anywhere. Use it at parties, barbecues, or anywhere you like. The battery pack accepts 4 AA alkaline batteries to give you 4 hours of fun. | The XCam2 camera is normally powered from a small plug-in AC power supply. But with the ZB11A battery pack, you can now take your XCam2 anywhere. Use it at parties, barbecues, or anywhere you like. The battery pack accepts 4 AA alkaline batteries to give you 4 hours of fun. | ||
| − | |||
*Open the lid on the base of the battery pack. | *Open the lid on the base of the battery pack. | ||
| − | |||
*Insert four AA alkaline batteries. Observe polarity. | *Insert four AA alkaline batteries. Observe polarity. | ||
| − | |||
*Pass the jack from the camera through the hole in the battery pack. | *Pass the jack from the camera through the hole in the battery pack. | ||
| − | |||
*Coil the wire neatly inside, avoiding the screw bases. | *Coil the wire neatly inside, avoiding the screw bases. | ||
| − | |||
*Screw the camera onto the battery pack, taking care not to trap any wire. | *Screw the camera onto the battery pack, taking care not to trap any wire. | ||
| − | |||
*Plug the jack from the battery pack into the camera. | *Plug the jack from the battery pack into the camera. | ||
Refer to the setup and operating instructions that came with the camera system for video receiver setup and operation. | Refer to the setup and operating instructions that came with the camera system for video receiver setup and operation. | ||
| + | |||
| + | ==Related Articles== | ||
| + | |||
| + | [[Category:frequently asked questions]] | ||
Latest revision as of 19:26, 21 March 2006
Questions
How do I setup my battery pack with the X10 camera?
Answer
The XCam2 camera is normally powered from a small plug-in AC power supply. But with the ZB11A battery pack, you can now take your XCam2 anywhere. Use it at parties, barbecues, or anywhere you like. The battery pack accepts 4 AA alkaline batteries to give you 4 hours of fun.
- Open the lid on the base of the battery pack.
- Insert four AA alkaline batteries. Observe polarity.
- Pass the jack from the camera through the hole in the battery pack.
- Coil the wire neatly inside, avoiding the screw bases.
- Screw the camera onto the battery pack, taking care not to trap any wire.
- Plug the jack from the battery pack into the camera.
Refer to the setup and operating instructions that came with the camera system for video receiver setup and operation.