Difference between revisions of "Motion Recording In Vanguard ICC"

From X10Wiki
Jump to navigation Jump to search
 
(3 intermediate revisions by the same user not shown)
Line 4: Line 4:
  
 
==Answer==
 
==Answer==
 +
#Set your motion sensor(s) to a different house code or [[More Than Four Cameras#Code Groups|unit code group]] than your camera(s). It is often easiest to put the sensor(s) on A1-A4 and the cameras(s) at A9-A12. You could also put the sensor(s) on A and the camera(s) on B.
 +
#Open Vanguard ICC, click the Options tab, then go to the Video Rec. tab: <br>[[image:Options_vid_rec.gif]]
 +
#In this tab, select '''Save in standard AVI format''' for '''Output File Type''' then click Apply.
 +
#Next, click the Motion subtab:<br>[[image:Options_motion.gif]]
 +
#Add your sensor, configure motion actions in the window that comes up, then click OK:<br> [[image:Options_mot_opt.gif]]
 +
#In the original Options-Motion window, confirm that the sensor is at the correct House and Unit code and that you have selected the correct Associated Camera. After doing this, click OK again.
 +
#To activate motion sensing, click the motion sensor icon in the lower right hand corner of the main Vanguard window (it will turn green):<br>[[image:Clickhere.JPG]]
  
#Set your motion sensor(s) to a different house code than your camera(s). It is often easiest to put the sensor(s) on A and the camera(s) on B.
+
==Related Articles==
#Open Vanguard ICC, click the Options tab, then click the Motion subtab:[[image:Options_motion.gif]]
+
[[Motion Recording In Vanguard ICC Troubleshooting]]
#Add your sensor, configure motion actions in the window that comes up, then click OK: [[image:Options_mot_opt.gif]]
 
#In the original Options-Motion window, confirm that the sensor is at the correct House and Unit code and that you have selected the correct Associated Camera. After doing this, click OK again.
 
#To activate motion sensing, click the motion sensor icon in the lower right hand corner of the main Vanguard window (it will turn green):
 
[[image:Clickhere.JPG]]
 

Latest revision as of 20:23, 23 June 2009

Question

How do I configure motion recording in Vanguard ICC?

Answer

  1. Set your motion sensor(s) to a different house code or unit code group than your camera(s). It is often easiest to put the sensor(s) on A1-A4 and the cameras(s) at A9-A12. You could also put the sensor(s) on A and the camera(s) on B.
  2. Open Vanguard ICC, click the Options tab, then go to the Video Rec. tab:
    Options vid rec.gif
  3. In this tab, select Save in standard AVI format for Output File Type then click Apply.
  4. Next, click the Motion subtab:
    Options motion.gif
  5. Add your sensor, configure motion actions in the window that comes up, then click OK:
    Options mot opt.gif
  6. In the original Options-Motion window, confirm that the sensor is at the correct House and Unit code and that you have selected the correct Associated Camera. After doing this, click OK again.
  7. To activate motion sensing, click the motion sensor icon in the lower right hand corner of the main Vanguard window (it will turn green):
    Clickhere.JPG

Related Articles

Motion Recording In Vanguard ICC Troubleshooting