Difference between revisions of "Power Horn Not Working"

From X10Wiki
Jump to: navigation, search
(Answer)
(Related Articles)
Line 13: Line 13:
  
 
[[PowerHorn Setup]]
 
[[PowerHorn Setup]]
 +
 +
[[Identifying and Troubleshooting Powerline Noise and Control Problems]]

Revision as of 01:08, 17 March 2007

Question

Why is my PowerHorn silent?

Answer

If you have plugged in your PowerHorn siren and are finding that it is not alarming while your console is sounding its alarm try the steps below before contacting support.

  1. Plug the PowerHorn into a different outlet. For testing purposes plug it into the same outlet as the security system console.
  2. The SH10A may not have heard the console send several repeated on and off signals. This generally is what triggers the PowerHorn. You can manually do this by pressing the on and off button repeatedly until the siren sounds its alarm. So, if it was set to A2, you would press the A2 on and off buttons on your palm remote repeatedly until the SH10A starts up. You then need to keep pressing the on and off buttons for it to keep making noise.

Related Articles

PowerHorn Setup

Identifying and Troubleshooting Powerline Noise and Control Problems