Difference between revisions of "Vanguard Zoom Camera Setup"

Latest revision as of 21:17, 10 June 2014

This guide should help you get started quickly with the X10 Vanguard Zoom Camera

Unpack these items.

Connect the camera to its power supply and plug it into a wall outlet.

Put 4 AAA batteries (not included) into the remote control.

Connect the wireless video receiver to power and plug it into a wall outlet.

Connect the video receiver to your TV.

Turn the video receiver on and flip up the antenna. Point the antenna toward the camera.

Select your TV's video input (or try channel 0 and then Channel Down). The camera's image should appear.

@@ Line 1: / Line 1: @@
-== EDITME ==
+==Introduction==
-[[category: needed pages]]
+This guide should help you get started quickly with the X10 Vanguard Zoom Camera
+==Setup==
+[[Image:van_1.jpg]]
+Unpack these items.
+[[Image:van_2.jpg]]
+Connect the camera to its power supply and plug it into a wall outlet.
+[[Image:van_3.jpg]]
+Put 4 AAA batteries (not included) into the remote control.
+[[Image:3_receiver_power.jpg]]
+Connect the wireless video receiver to power and plug it into a wall outlet.
+[[Image:4_receiver_videoin.jpg]]
+Connect the video receiver to your TV.
+[[Image:5_receiver_on.jpg]]
+Turn the video receiver on and flip up the antenna. Point the antenna toward the camera.
+[[Image:6_video_select.jpg]]
+Select your TV's video input (or try channel 0 and then Channel Down). The camera's image should appear.
+==Related Articles==
+[[Problems Opening Remote Viewer]]
+[[Troubleshooting Picture Quality on PC]]
+[[Camera Video Display Problems on TV]]
+[[Troubleshooting Picture Quality on TV]]
+[[Remote Control Doesn't Control Vanguard Camera]]
+[[Vanguard Camera Won't Focus]]
+[[Remove Camera Text from Video Display]]
+[[Category:hardware]]
+[[Category:frequently asked questions]]