X10 Macros With The iconRemote RF

From X10Wiki
Jump to navigation Jump to search

Question

How do I tell my iconRemote RF to issue a series of X10 commands with just one button press?

Answer

After you have set up multiple X10 devices in the iconRemote RF`s memory you can build an X10 macro to control all those devices with a single button press.


1. Press Home, press Setup, press X10 Macros.

IR32A Macro Setup Step 1.gif

2. Select a Macro key. In this case, we will select M

IR32A Macro Setup Step 2.gif

3. Press Pick Module.

IR32A Macro Setup Step 3.gif

4. Select a room. In this case we will select Outdoors.

IR32A Macro Setup Step 4.gif

5. Select the icon for the device you want to control. In this case we will select the porch light.

IR32A Macro Setup Step 5.gif

6. Press On to assign command. To add another command, press Pick Module.

IR32A Macro Setup Step 6.gif

7. This time, we will select Living Room. Now we will select the living room lamp icon.

IR32A Macro Setup Step 7.gif

8. Press Off, to assign the command. Now press Set Delay six times to set a 6 second delay. Now press Save, then press Done.

IR32A Macro Setup Step 8.gif

9. You're finished! You now have a Macro that turns on your porch and turns off your living room light 6 seconds later. It's perfect for bedtime!

IR32A Macro Setup Step 9.gif